Распространенные неисправности резины и как их избежать

1. Scorching (premature cure) Compound cures in the mixer or barrel before shaping. Prevent with proper accelerator choice, controlled mix temperature (<120–140 °C) and stored compound used within its shelf life.

2. Ozone / weather cracking Surface cracks from ozone, especially on stretched NR and SBR. Use EPDM or CR for outdoor duty, add antiozonants, and avoid permanent tensile stress in design.

3. Swelling in oil NR, SBR and EPDM swell badly in mineral oil. For oil or fuel contact specify NBR (or FKM for extremes).

4. Compression set A seal that no longer springs back leaks. Choose the right hardness and cure state, and confirm compression-set data at your service temperature.

5. Blooming / surface exudation Additives migrate to the surface (chalky or oily film). Usually a formulation balance issue — adjust dosage or switch additive type.

Bottom line Most failures trace to a mismatch between compound and duty. Describe the real service condition up front. [Post an RFQ](/rfq/post) and let matched factories propose a compound.

Sourcing & Support - Customization supported: size, color, packaging and certification can be customized to drawings; MOQ is subject to the supplier. - Data shown: market figures are from public industry research (2025 global rubber market ≈ USD 382 billion; China consumption >11 million tonnes). Platform live inventory: 251 products / 42 categories (as of 2026-10). - For reference of current stock only: the parameters above are general industry ranges; final specs are subject to actual inventory and the quotation sheet. - For specific details, contact our team: specs, lead time, MOQ, certification files, etc. — please [submit an RFQ](/rfq/post) or contact our online support directly.

Browse live listings: Rubber & Chemical · Rubber Additives · Tires & Rubber Products · Rubber Raw Materials